IEC 61400-12-1: Wind Turbines – Power Performance Measurements of Electricity-Producing Wind Turbines

The IEC 61400-12-1 standard specifies methods for measuring and analyzing the power performance of wind turbines. It ensures consistent and reliable data for assessing the energy output of wind turbines under various conditions.

MEASNET Standards

MEASNET (Measurement Network for Wind Energy) is an international network of organizations focused on harmonizing and ensuring the quality of measurements and analyses in the wind energy sector.

Combination of IEC 61400- 12-1 [1] and MEASET standards

IEC 61400-12-1 Focuses specifically on power performance measurements for wind turbines, providing the theoretical and technical foundation for assessing turbine output.

MEASNET Standards Extend the IEC framework into practical applications, including certification and site-specific assessments, ensuring real-world reliability and consistency

IS 2062 for materials with yield stress of 250MPa for mast

IS 2062 is the Indian Standard for hot-rolled steel products for structural use. It specifies the requirements for steel used in general structural purposes, including masts, towers, bridges, and other similar structures. For materials with a yield stress of 250 MPa, IS 2062 provides specific guidelines and classifications.

IS 2266 for guy ropes =6x37M steel core (8mm and 10mm dia) with yield stress of 1770MPa

IS 2266 defines the characteristics of steel wire ropes and specifies their construction, dimensions, testing, and properties. These ropes are usually made from carbon steel wires and may be subjected to tensile loads, bending, and torsion during use.

Regarding your specific case:

Guy Ropes with Steel Core (6x37 Construction)

6x37 construction refers to the rope construction, meaning that the rope has 6 strands, and each strand consists of 37 wires. This is a common type of construction for guy ropes due to its flexibility, strength, and durability.

Steel Core This indicates that the core of the rope is made from steel, which provides higher strength and resistance to deformation under load compared to fiber cor

Diameters: 8 mm and 10 mm

The diameters of the ropes you mentioned (8 mm and 10 mm) are the overall diameters of the steel wire ropes, which will influence both their strength and flexibility. The choice of diameter will affect the load-bearing capacity and other performance characteristics.

Yield Stress of 1770 MPa

The yield stress (also called the yield strength) of 1770 MPa indicates that the steel used in the core and wires of the rope has a yield strength of 1770 megapascals (MPa). Yield strength is the stress at which the material will begin to deform plastically. Beyond this point, the material will not return to its original shape, and the rope could fail or stretch permanently.

Yield Stress = 1770 MPa: This is a relatively high-strength steel, suitable for applications where high tensile strength is required, such as in guy ropes supporting heavy loads (e.g., for towers, masts, or overhead lines).

IS:875-2015 for wind loads

The IS 875:2015 (Part 3) is an Indian Standard code that provides guidelines for calculating wind loads on buildings and structures. It is a part of the IS 875 series, which deals with design loads for buildings and structures. The official title is:

Yield Stress = 1770 MPa: This is a relatively high-strength steel, suitable for applications where high tensile strength is required, such as in guy ropes supporting heavy loads (e.g., for towers, masts, or overhead lines).

IS:800-2007 for design of steel members

The IS 800:2007 is an Indian Standard code that provides the general provisions and design requirements for steel structures.

Our main focus is to provide accurate data and predictions for resource assessment to ensure your renewable energy project is a success.

Join with ZESPL to harness the power of wind with precision and reliability. Together, we can build a sustainable future powered by clean energy.